DRILLING RIG Mi60
DESCRIPTION
Drilling machine for water and mining, seismic, coring and geothermal research to increase depth, it can in fact reach 1500 m and it is possible to access both the plant and the high capacity compressor.
The installation can be on a truck or semi-trailer and in the case of maneuvering also 9 m rods.
The pride of our production in terms of capacity remains in any case a very flexible machine, allows in fact to work with various drilling systems: turn and turn a mud, direct drilling and back to hammer bottom hole.
The drilling machine is also equipped with electric controls that can be activated in case of need even at a distance.
WORK METHODS
-Rotation with direct circulation
-Nucleus destruction with bleeding by water, mud and foam
-Rotation with down the hole hammer
-Reverse circulation
-Coring
POWER PACK
– Engine Power from 394 Hp (294 kW) to 831 Hp (620 kW)
FUEL TANK
– Capacity from 400 litri (106 gal) to 600 litri (132 gal)
SLIDING MAST (OPTIONAL):
– Stroke 2,250 mm (7 ft 5”)
MAST
– Maximum stroke of rotary head 10,6 m (34 ft 9”)
– Maximum pull up 59,300 daN (446,578 lbf) – Pull down 31,500 daN (70,818 lbf)
ROTARY HEAD
– Maximum torque 37,500 Nm (57,658 lbf•ft)
– Maximum speed 1,200 Rpm
WINCH
– Standard: Maximum line pull 10,000 daN (22,045 lbf)
– Optional: Maximum line pull 15,000 daN (33,068 lbf)
– Wire-line: Maximum line pull 1,300 daN (2,922 lbf) – 1,360 m (4,462 ft) of rope – 93 m/min (305 ft/min)
DOUBLE HYDRAULIC CLAMP
– Model MS620: Maximum passage 620 mm (24.5”)
