Drilling Rig MI45

DESCRIPTION

Drilling rig for water wells, mineral exploration, geothermal applications, coring, seismic. It can drill up to 1000 m and it is possible to mount a mud pump or a high capacity compressor depending on the various needs. The rig can be mounted on truck or on semi-trailer (in this case it is possible to handle 9 m drill pipes). Its robust construction does not prejudice its versatility. The rig can be used with all the main drilling methods: direct and reverse circulation by mud and by down the hole hammer. It can be operated remotely.

WORK METHODS
-Rotation with direct circulation -Nucleus destruction with bleeding by water, mud and foam -Rotation with down the hole hammer -Reverse circulation -Coring
POWER PACK
Engine Power from 394 Hp (294 kW) to 831 Hp (620 kW)
FUEL TANK
Capacity from 300 litri (79 gal) to 600 litri (158 gal)
SLIDING MAST(OPTIONAL)
stoke 2.250 mm (7 ft 5”)

MAST
Maximum stroke of rotary head 10,6 m (34 ft 9”) Maximum pull up 45.000 daN (101,160 lbf) – pull down 21.000 daN (47,210 lbf)
ROTARY HEAD
Model TM55: Maximum torque 27.450 Nm (17,333 lbf•ft) - maximum speed 1.500 Rpm Modello TM20CR12: Maximum torque 10.200 Nm (7,523 lbf•ft) - maximum speed 1.200 Rpm
WINCH
Standard: Maximum line pull 10.000 daN (22,045 lbf) Optional: Maximum line pull 15.300 daN (34,396 lbf) Wire-line: Maximum line pull 1.300 daN (2,922 lbf) – 3.500 m (11,483 ft) of rope– 185 m/min (607 ft/min)
DOUBLE HYDRAULIC CLAMP
Model MS520: Maximum passage 520 mm (20”)

DO YOU NEED MORE INFORMATION
ABOUT THE MI45?

Video

MASSENZA M.I.45 - Core drilling up to 2600 m

The M.I.45 Hydraulic Drilling Rig is designed for mineral research using rods model NQ, HQ e PQ. It can reach very high depth (up to 2620 meters using HQ rods system).