WORK METHODS |
---|
-Rotation with direct circulation -Nucleus destruction with bleeding by water, mud and foambr> -Rotation with down the hole hammer -Reverse circulation -Coring |
POWER PACK |
Engine Power from 360 Hp (265 kW) to588 Hp (432 kW) |
FUEL TANK |
Capacity from 300 litri (79 gal) to 600 litri (158 gal) |
SLIDING MAST (OPTIONAL) |
stroke2.250 mm (7 ft 5”) |
MAST |
---|
Maximum stroke of rotary head 8,4 m (27 ft 7”) Standard: maximum pull up 27.300 daN (61,373 lbf) – pull down 147.00 daN (33,047 lbf) Optional: maximum pull up 34.300 daN (77,109 lbf) – pull down 18.470 daN (47,210 lbf) |
ROTARY HEAD |
Model TM55: Maximum torque 35.380 Nm (26,094 lbf•ft) - Maximum speed 120 Rpm Model TM20CR12: Maximum torque 10.200 Nm (7,523 lbf•ft) - Maximum speed 1.200 Rpm |
WINCH |
Standard: Maximum line pull 7.000 daN (15,737 lbf) Optional: Maximum line pull 10.000 daN (22,045 lbf) Wire-line: Maximum line pull 1.300 daN (2,922 lbf) – 822 m (2697 ft) of rope – 110 m/min (351 ft/min) |
DOUBLE HYDRAULIC CLAMP |
Modello MS520: Maximum passage 520 mm (20”) |