ASIA - New MI20 for water wells and mineral research
New MI20 for the Asian market for water wells and mining researches.
Set up on an IVECO TRAKKER AD380T42H 6x4 Euro 3 truck (420 HP), the puncher is a multipurpose machine in all respects: thanks to its special rotating head, it can perform drilling both for water research and for mining research.
With a 6-speed rotating head, with torque of 14,250 Nm and a maximum of 720 rpm achievable, the new Massenza MI20 can handle all types of work: ductility is its winning weapon.
The 21.5 tonne pull allows to reach high depths and, thanks to the rod loading system mounted under the rotation head, the drilling is carried out in absolute safety and great speed.
The following are the main characteristics of the drilling rig:
DRIVE OPERATION BY PTO OF THE 420 HP TRUCK
MAST: Rotation head travel 6.7 m (22 ft)
Maximum pull up and down: 21,500 daN (48,336 lbf)
Maximum torque 14.630 Nm (7.102 lbf • ft)
Maximum speed 720 Rpm
Maximum direct shot 14.200 kg (31.305 lbf)
Direct shot max 1.020 kg (2.248 lbf)
Cable capacity: 847 m (2778 ft)
DOUBLE HYDRAULIC CLAMP MS430
Maximum diameter of passage 430 mm (17 ")
VIEW OPENING SYSTEM
Maximum diameter of passage 800 mm (31 ")
PUMP MUD GARDEN DENVER 5 "1 / 2x8"
Maximum flow rate 1200 l / min (317 GPM)
Pressure max 80 Bar (1,136 PSI)
HIGH PRESSURE TRIPLEX PUMP:
Maximum flow 200 l / min (53 GPM) at 69 bar (1,000 PSI)